ITC M-60-Series Drill & Rivet Installation Machine

Model ITC-C-12-60-M-Series / 60" C-Frame Style

Townend Aerospace Tool Company / ITC Aerospace Division has manufactured the same capability used in the portable models of the Mini-Riveter into a stationary C-Frame construction that allows for larger part capability with the same reliability and performance found in our portable models. Units can be fitted with hopper or vibratory feed bowls for supply the fastener.

Standard Features

Programmable Logic Controller

120 VAC Duplex Outlets

Tandem Foot Switch Controls

Upset Force 12,000

Capable of Drilling Aluminum, Steel, and Titanium Alloys

G39 Tooling Capability

Maximum Cycle Time 4.0 Seconds Clamp to Unclamp

Machine Cycle Timer

Machine Cycle Counter

Set Up, Tool Change, and Run Modes

Missing Rivet Detector

Adjustable Chip Blowers

Drill Spindle Accept Acura Flex Collets

Three Position Head (Drill/Countersink, Sealant, Rivet)

Capable of Installing Universal, Flat Head, Modified Universal Head Rivets, and Hi Set Rivets with Proper Tooling

Countersink Depth Selection in 0.0005 Inch Increments

Variable Drill Feed Adjustable from 2-96 IPM

Adjustable Drill Speed from 0 to 6000 RPM

Adjustable Clamp Force from 50 to 350 Pounds

Countersink Adjustment Range .75 Inches

Maximum Stack Thickness .500 Inches

Mini-Hopper Feed System Capable

Work Height Approximately 58 Inches

Deep Drop Daylight Opening of 4 inches

Front Fixed Operator Interface

Operating Power 110VAC, 20 AMPS or Buyers Requirements.

Optional

Lower Ram Grip Sensing via Encoder, Displayed in Grip Length Increments/Inches

Resilient/Retractable Pressure Foot Bushing

Detentable/Rotatable Pressure Foot Bushing

Work Light High Intensity Halogen Lamp

Dry Air Coolant System

Lube Mist Lubricator

EFD Sealant Dispensing Unit and Controller

DC Servo Motor Spindle Drive

Laser Spot Locator Green / Red

24", 30", 36", or 60" Inch Throat Depth

All Electric / Pneumatic Option

Drill Spindle Adjustable Speed Up To 18,000 RPM

Probe Station For Locating Pre-Drilled Holes

Optional Four Position Head (Drill/Countersink, Sealant, Probe, Rivet) Or Dual Drill Spindles with Shave Capability

Upper Tooling Pressure Foot Bushing Clearance of 2.5 inches

Rivet Spot Locator

Automatic Fastening System Using Vibratory Feeder Bowls, and Orientor Injectors

Broken Drill Detector

Safety Light Curtains

Watch Video of This Machine

For more information, contact:

Herb Cupp
Director Sales / Service
herb@tatco.com

Home